hello@flicktype.groups.io | Need help using latest FlickType Watch/Container app after inadvertent update

Home Guidelines Messages Hashtags Subgroups Wiki

Date Date 1 - 20 of 30

Need help using latest FlickType Watch/Container app after inadvertent update

Alan Lemly #1927 Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1928 Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Alan Lemly #1929 Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS toggle quoted message Show quoted text From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1930 Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Alan Lemly #1931 Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan toggle quoted message Show quoted text From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Wednesday, September 29, 2021 9:38 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1932 If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Wednesday, September 29, 2021 9:38 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Alan Lemly #1933 Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan toggle quoted message Show quoted text From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Thursday, September 30, 2021 10:14 AM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Wednesday, September 29, 2021 9:38 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1934 Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Thursday, September 30, 2021 10:14 AM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Wednesday, September 29, 2021 9:38 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1935 I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Thursday, September 30, 2021 10:14 AM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Wednesday, September 29, 2021 9:38 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Alan Lemly #1936 Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly toggle quoted message Show quoted text From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Thursday, September 30, 2021 10:41 AM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Thursday, September 30, 2021 10:14 AM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Wednesday, September 29, 2021 9:38 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Wednesday, September 29, 2021 8:39:41 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Luke Davis #1937 I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: toggle quoted message Show quoted text Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ____________________________________________________________________________________________________________________________________________________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1938 Agreed. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 30, 2021, at 6:30 PM, Luke Davis <newanswertech@...> wrote: I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ____________________________________________________________________________________________________________________________________________________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1939 Hello Alan, I just tried typing in FlickType, then I went to notes via the app switcher and did a two finger quadruple tap which pasted the text into notes. I then used the app switcher to go back to FlickType where the text had been cleared. No need to use the three finger quadruple tap to copy the voiceover, and actually no need to even listen to what you have just typed. I hope this helps, but if it doesn’t, no worries, do whatever works for you! 👍 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 30, 2021, at 6:51 PM, Chuck Dean via groups.io <cadean329@...> wrote: Agreed. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 6:30 PM, Luke Davis <newanswertech@...> wrote: I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ____________________________________________________________________________________________________________________________________________________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Daniel McGee #1940 Chuck, that is something that I wouldn't of thought of! Previously, I would just go to my: edit item in the rotor, find paste and double tap. But now though, think I'm gonna give the gesture a go. So neat, you learn something new everyday.☺️ toggle quoted message Show quoted text On 1 Oct 2021, at 03:02, Chuck Dean <cadean329@...> wrote: Hello Alan, I just tried typing in FlickType, then I went to notes via the app switcher and did a two finger quadruple tap which pasted the text into notes. I then used the app switcher to go back to FlickType where the text had been cleared. No need to use the three finger quadruple tap to copy the voiceover, and actually no need to even listen to what you have just typed. I hope this helps, but if it doesn’t, no worries, do whatever works for you! 👍 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 6:51 PM, Chuck Dean via groups.io <cadean329@...> wrote: Agreed. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 6:30 PM, Luke Davis <newanswertech@...> wrote: I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ____________________________________________________________________________________________________________________________________________________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Alan Lemly #1941 Luke, Thanks for this clarification. You're right that the automatic copy does occur when opening the target app via the app switcher without closing out the container app. This is much more convenient as I like to leave the container app running. Alan Lemly toggle quoted message Show quoted text -----Original Message----- From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Luke Davis Sent: Thursday, September 30, 2021 8:30 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ______________________________________________________________________ ______________________________________________________________________ ________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Alan Lemly #1942 Thanks, Chuck. I think I’ve finally caught up and agree with you and Luke that the three finger quadruple tap for copying is unnecessary and your way is much faster. Alan toggle quoted message Show quoted text From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck Dean Sent: Thursday, September 30, 2021 9:02 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I just tried typing in FlickType, then I went to notes via the app switcher and did a two finger quadruple tap which pasted the text into notes. I then used the app switcher to go back to FlickType where the text had been cleared. No need to use the three finger quadruple tap to copy the voiceover, and actually no need to even listen to what you have just typed. I hope this helps, but if it doesn’t, no worries, do whatever works for you! 👍 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 6:51 PM, Chuck Dean via groups.io <cadean329@...> wrote: Agreed. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 6:30 PM, Luke Davis <newanswertech@...> wrote: I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ____________________________________________________________________________________________________________________________________________________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1943 Hello Allan, As they say, my bad, or at least a poor choice of words. I said that I would close FlickType, when I actually meant that I was leaving the app, either by pressing the home button on my iPhone 8 or double clicking the home button to open the app switcher. And thank you Luke for clearing that up. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Sep 30, 2021, at 9:27 PM, Alan Lemly <walemly@...> wrote: Luke, Thanks for this clarification. You're right that the automatic copy does occur when opening the target app via the app switcher without closing out the container app. This is much more convenient as I like to leave the container app running. Alan Lemly -----Original Message----- From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Luke Davis Sent: Thursday, September 30, 2021 8:30 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ______________________________________________________________________ ______________________________________________________________________ ________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Alan Lemly #1944 Hi Chuck, No worries. I'm enjoying the container app as well as I did the FlickType keyboard primarily thanks to tips I've received from this list. Not fooling with the three finger quadruple tap is a huge time saver. Thanks to you and Luke and others on this list for the continual tips. Now, I've got my fingers crossed that the FlickType Watch/ Container app will remain in the App store and be downloaded to my next new iPhone. Alan Lemly with Outlook for iOS toggle quoted message Show quoted text From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Thursday, September 30, 2021 11:34:57 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Allan, As they say, my bad, or at least a poor choice of words. I said that I would close FlickType, when I actually meant that I was leaving the app, either by pressing the home button on my iPhone 8 or double clicking the home button to open the app switcher. And thank you Luke for clearing that up. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 9:27 PM, Alan Lemly <walemly@...> wrote: Luke, Thanks for this clarification. You're right that the automatic copy does occur when opening the target app via the app switcher without closing out the container app. This is much more convenient as I like to leave the container app running. Alan Lemly -----Original Message----- From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Luke Davis Sent: Thursday, September 30, 2021 8:30 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ______________________________________________________________________ ______________________________________________________________________ ________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
leonard morris #1945 I have been following this thread and I’m a little confused here I downloaded Flick Type classic which is quite accessible and I downloaded the FlickType watch app which you guys are discussing the container I suppose but I can never make that work on my iPhone and I don’t really need it for the watch. So what is the container app that makes flick type usable on the iPhone? Every country has an identity, history, custom, and culture. It’s a unique landscape in determining how its people Live, work, and play. toggle quoted message Show quoted text On Oct 1, 2021, at 10:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, No worries. I'm enjoying the container app as well as I did the FlickType keyboard primarily thanks to tips I've received from this list. Not fooling with the three finger quadruple tap is a huge time saver. Thanks to you and Luke and others on this list for the continual tips. Now, I've got my fingers crossed that the FlickType Watch/ Container app will remain in the App store and be downloaded to my next new iPhone. Alan Lemly with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Thursday, September 30, 2021 11:34:57 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Allan, As they say, my bad, or at least a poor choice of words. I said that I would close FlickType, when I actually meant that I was leaving the app, either by pressing the home button on my iPhone 8 or double clicking the home button to open the app switcher. And thank you Luke for clearing that up. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 9:27 PM, Alan Lemly <walemly@...> wrote: Luke, Thanks for this clarification. You're right that the automatic copy does occur when opening the target app via the app switcher without closing out the container app. This is much more convenient as I like to leave the container app running. Alan Lemly -----Original Message----- From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Luke Davis Sent: Thursday, September 30, 2021 8:30 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ______________________________________________________________________ ______________________________________________________________________ ________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member
Chuck Dean #1946 Hello, The container app and the FlickType watch app are the same. You should be able to use the container app just like FlickType classic with a few control changes. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 toggle quoted message Show quoted text On Oct 1, 2021, at 8:19 AM, leonard morris <lmorris1953@...> wrote: I have been following this thread and I’m a little confused here I downloaded Flick Type classic which is quite accessible and I downloaded the FlickType watch app which you guys are discussing the container I suppose but I can never make that work on my iPhone and I don’t really need it for the watch. So what is the container app that makes flick type usable on the iPhone? Every country has an identity, history, custom, and culture. It’s a unique landscape in determining how its people Live, work, and play. On Oct 1, 2021, at 10:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, No worries. I'm enjoying the container app as well as I did the FlickType keyboard primarily thanks to tips I've received from this list. Not fooling with the three finger quadruple tap is a huge time saver. Thanks to you and Luke and others on this list for the continual tips. Now, I've got my fingers crossed that the FlickType Watch/ Container app will remain in the App store and be downloaded to my next new iPhone. Alan Lemly with Outlook for iOS From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...> Sent: Thursday, September 30, 2021 11:34:57 PM To: hello@flicktype.groups.io <hello@flicktype.groups.io> Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Allan, As they say, my bad, or at least a poor choice of words. I said that I would close FlickType, when I actually meant that I was leaving the app, either by pressing the home button on my iPhone 8 or double clicking the home button to open the app switcher. And thank you Luke for clearing that up. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 9:27 PM, Alan Lemly <walemly@...> wrote: Luke, Thanks for this clarification. You're right that the automatic copy does occur when opening the target app via the app switcher without closing out the container app. This is much more convenient as I like to leave the container app running. Alan Lemly -----Original Message----- From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Luke Davis Sent: Thursday, September 30, 2021 8:30 PM To: hello@flicktype.groups.io Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I think "closing" in this context, means "leaving the app". You shouldn't need the quad tap to copy, it should do it automatically when you switch to twitter, which is closing (leaving) the Flicktype app. Assuming you have the copy and clear setting on. Luke Alan Lemly wrote: Chuck, I’m not sure how you’re leaving FlickType to get that result. Several times today, I typed several tweets in the container app, did a three finger quadruple tap to copy the text, opened the App switcher to go to Twitter, and pasted a new message using the two finger quadruple tap. So, I never closed FlickType which I think is required in order to execute the copy that is in the settings. Alan Lemly From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:41 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update I went into settings, tapped on copy and clear on exit, and did a three finger quadruple tap to copy the text to send to you in an email, but when I left FlickType it copied what was on the screen... Which was nothing. As Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:24 AM, Chuck Dean via groups.io <cadean329@...> wrote: Yes, I understand that, but what I realized is you can’t do anything with the text you copied without leaving Fliktype. 😎 Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 30, 2021, at 8:22 AM, Alan Lemly <walemly@...> wrote: Thanks, Chuck. I do have the copy and clear turned on in Settings and it does work as you described. I like knowing all the available alternatives in case I wish to copy what I’ve just typed in the container app without closing FlickType. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Thursday, September 30, 2021 10:14 AMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update If you have a copy and clear an exit turned on in settings, it is unnecessary to do the three finger quadruple tap. When you leave the app, it will copy the text, and erase the text that you copied with the gesture. However, if you do not have a copy and clear an exit turned on in settings, then you’re probably taking the easiest route. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 10:15 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, And I followed your command gesture setting to make the two finger quadruple tap a paste which goes hand in hand with the built in three finger quadruple tap copy of what Voiceover last spoke. Alan From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of Chuck DeanSent: Wednesday, September 29, 2021 9:38 PMTo: hello@...: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Yes, I use that three finger quadruple tap quite a bit Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 7:35 PM, Alan Lemly <walemly@...> wrote: Hi Chuck, The other option is to do a three finger quadruple tap to copy the VoiceOver spoken text from the container window and paste it to the replied to email using the rotor edit button as I'm doing just now. Thanks for your help. Alan with Outlook for iOS ______________________________________________________________________ ______________________________________________________________________ ________________ From: hello@flicktype.groups.io <hello@flicktype.groups.io> on behalf of Chuck Dean <cadean329@...>Sent: Wednesday, September 29, 2021 8:39:41 PMTo: hello@flicktype.groups.io <hello@flicktype.groups.io>Subject: Re: [FlickType] Need help using latest FlickType Watch/Container app after inadvertent update Hello Alan, I have tried to use the share button to answer existing emails with no success. What I do, as I am doing now, is type my response in the container app, then I close the app which will copy the text to the clipboard (be sure you have this turned on in settings). Now go to the email and paste the text. I have it set up in settings, accessibility, voice over, commands, editing. that a two finger quadruple tap will perform a paste. The share button is good for starting new emails, messages, and exporting to notes, Google, etc. Chuck (mobile) Pleez x cuze enny tie ping or spelin air ores. Our 1972 Honda 600 Coupe Our 1961 Vespa 400 On Sep 29, 2021, at 6:12 PM, Alan Lemly <walemly@...> wrote: Hi List, Well, after painstakingly updating every app on my device with a new app in the App Store accept for FlickType, either my device or the Apple gods or something decided to update FlickType too. Now, I’ve lost my keyboard extension and I’m trying to figure the best way to use the container app in the way I use my device. I tend to open an email or text in order to reply to it and then want to type my response using the container app and copy and paste it to the appropriate place. If there is a way to do this with the FlickType update running in iOS 14.8, I haven’t figured out how. I get a share button in the container app which works fine to copy what was typed into a new message or email but doesn’t seem to work in replying to an existing message. I would very much appreciate any help directing me on how to do what I want to do with the container app. Thanks in advance for your help. Alan Lemly
More All Messages By This Member

1 - 20 of 30

1
2

Previous Topic Next Topic

Home Guidelines Hashtags Subgroups Wiki About Features Pricing Updates Terms Help Twitter