Date   
Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

You are a beta tester because you joined as a beta tester. If you volunteered to be an alpha tester, then you will be an alpha tester. Someone who is an alpha test is going to have to have much more patience, and understand that the earliest versions of the software are going to be very buggy and very problematic. Therefore they are the ones that smooth out the rough edges, before the beta testers get it.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 9, 2018, at 12:01 AM, Paula Page <fairyhugs@...> wrote:

I'm assuming I'm a beta tester as I only joined yesterday!

Paula

On 9 Apr 2018, at 07:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly









Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.

-----Original Message-----
From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly






Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

Hi Paula,

you have to ask, to become a Alpha tester.

Dave.

-----Original Message-----
From: Paula Page
Sent: Monday, April 09, 2018 8:01 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I'm assuming I'm a beta tester as I only joined yesterday!

Paula

On 9 Apr 2018, at 07:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly








Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

Hi guys, if nothing else, it makes a great comedy sketch. lol.

I think i need Alpha testers for my head.

Dave.

-----Original Message-----
From: Harry Bell
Sent: Monday, April 09, 2018 8:04 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I’m losing the plot here! What is an alpha tester? I’m testing the Flicktype beta which is early versions of Flicktype. The alpha versions are what?
Thanks
Harry

On 9 Apr 2018, at 08:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly








Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly










Re: Test message to Flicktype subgroups and former group address

Paula Page
 

Ha ha, it was so simple, I missed that completely! :)

Paula

On 9 Apr 2018, at 09:12, Chuck Dean <cadean329@...> wrote:

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly











Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message-----
From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly










Re: Test message to Flicktype subgroups and former group address

Daniel McGee
 

I thought this one that I'm on is the beta list. Where as the email address that starts with: hello was the address that Kosta & Ashley used for answering enquiries.

I'm feeling confused here as well. :(

On 9 Apr 2018, at 09:51, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly














Re: Test message to Flicktype subgroups and former group address

Paula Page
 

Its easy, I've worked it out now. This is the group for anything general, then you join either the alpha or beta group for anything more specific. :)
Paula

On 9 Apr 2018, at 09:51, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly














Re: Test message to Flicktype subgroups and former group address

MariaRosa Chapman
 

HI.

I requested to join the alpha team, but I haven’t seen a message to say whether or not I am on the alpha group.
please help?

thanks
Maria

On 9 Apr 2018, at 6:51 pm, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly














Re: Test message to Flicktype subgroups and former group address

 

Hi Folks,

I expect we're going to have to wait for the developers, Ashley or Kosta, to let us know how they want us to proceed with posting using the subgroups. I can offer my opinion on how I expect it will work but know that it is strictly speculation on my part.

The original flicktype group would have become the main or top group when the developers created the alpha and beta subgroups. I guess they renamed it as a subgroup called hello@flicktype.groups.io in order to have a separately named location for the main group postings formerly going to flicktype@groups.io. In fact, if you initiate a new post to the old flicktype@groups.io address, the message is posted as coming from hello@flicktype.groups.io without any special action on your part.

As the Alpha program becomes more active, I expect they will want messages regarding those releases to go to alpha@flicktype.groups.io. At some point, the FlickType app will officially drop and I imagine the Hello subgroup will be where messages related to it will be posted. Any dialog concerned with alpha or beta builds will probably go to those subgroups.

As I said initially, we'll have to wait for the developers to clarify this and as with any new venture, confusion should wane as the process evolves.

Happy FlickTyping.

Alan Lemly

-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Maria and Joe Chapman
Sent: Monday, April 09, 2018 4:24 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

HI.

I requested to join the alpha team, but I haven t seen a message to say whether or not I am on the alpha group.
please help?

thanks
Maria

On 9 Apr 2018, at 6:51 pm, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and
former group address

I suggest you go to your phone, and put your finger on your FlickType
icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and
former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io]
On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and
former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages>
https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below
message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to
<mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly>
@walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io>
flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which
didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io>
hello@flicktype.groups.io
<mailto:[mailto:hello@flicktype.groups.io]>
[mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and
former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I
also
am unclear why the former < <mailto:flicktype@groups.io>
mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer
works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io>
mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta,
and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly














just a test, please ignore

Dave <dave.beckett.uk@...>
 

Re: Email Operations for Changing Groups.io List Settings

Gina Grunden
 

I'm confused as well.

-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf
Of Dave
Sent: Sunday, April 08, 2018 7:21 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Email Operations for Changing Groups.io List
Settings

Hi Paula,

you're not on your own, i'm very confused too.

Dave.


-----Original Message-----
From: Paula Page
Sent: Sunday, April 08, 2018 10:37 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Email Operations for Changing Groups.io List
Settings

I am very confused. If I stay in this group, what messages will I get? Do I
need to join a subgroup?

Paula

On 8 Apr 2018, at 21:30, FlickType <@FlickType> wrote:

Please note that we have now created the alpha@flicktype.groups.io and
beta@flicktype.groups.io subgroups. This means that the general group
had to change to a flicktype.groups.io type of address, and it is now
hello@flicktype.groups.io. I am not sure if the above posted links by
Alan will now work, but it's worth a try.

FYI the creation of the 2 subgroups was done for the following reason:

The number of beta testers has increased dramatically, and keeps
increasing faster and faster, and with that the number of messages
will soon be problematic for folks looking to find something specific
as well as keep their inbox under control. The alpha group will take
away some of that volume and will also ensure that the beta releases,
even though less frequent, will be more polished and probably trigger
fewer bug report messages. In a similar fashion, once FlickType hits
the App Store later this month, many people will want to join the
discussion but will not be interested in anything related to beta or alpha
builds.

Hope this helps, and please let us know how we can further improve
this, we are open to ideas.
- Kosta


Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

Hi Alan,
I agree, this seems like the most reasonable explanation.

Re: Looking for alpha testers

Ed Worrell <blindworrell@...>
 

Hello,

I would love to be added to the alfa beta group.

Thanks,

Ed

On Apr 7, 2018, at 4:58 PM, FlickType <@FlickType> wrote:

Hi all,

We recently crossed 500 beta testers, and it won't be long before we hit a thousand or more. This poses some significant challenges when it comes to iterating fast on the app, while ensuring that no critical bugs make it to such a large group of users. Even though the app is still very much in beta, we want our testers to be using it as a daily tool that they can rely on, and we don't want to become more risk-averse in how we develop the app.

To this end, we are introducing a new "alpha" program. The idea is to have a smaller group of users who are willing to receive more frequent, and sometimes less polished versions of the app, and based on their feedback, builds that are deemed acceptable will then be pushed to the wider beta group which could eventually, and hopefully, number thousands of people.

If you are interested, the only thing you need to do is just let us know and we will add your email to the internal Alpha group. Everything else will be the same, including how you get builds from TestFlight. There is nothing else that you need to do on your end. We might create a special sub-group in the mailing list to gather all feedback from the alpha group there, rather than have everyone be notified about messages relating to builds that they can't yet get. We do want the alpha discussion to be done in the open though, so everyone can read about it and anticipate what's coming. More details on how to submit alpha feedback will be coming soon.

Thank you for your incredible help and support so far, you guys have been awesome!
- Kosta


just testing, if this old address still works

Dave <dave.beckett.uk@...>
 

Re: just testing, if this old address still works

Gina Grunden
 

It does, yes. Your message came through loud and clear.

-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf
Of Dave
Sent: Monday, April 09, 2018 2:05 PM
To: hello@flicktype.groups.io
Subject: [flicktype] just testing, if this old address still works

How do you use FlickType?

Chuck Dean
 

How do you use FlickType?
Hello everyone,
After a few hours of playing with FlickType I have found the best way, for me, to use this keyboard is to hold it between my hands in landscape mode, with my index fingers over the top, and I type with my two thumbs.
This allows me to hold the iPhone securely and type quickly. I
The only problem I had was inserting a new line, because to flick down with two fingers I had to change my grip, and the new line button on the lower right was a little too awkward for my aging thumbs.
But I found that I can flick down with both thumbs to get the same results.
The more I use this app, the better it gets!


Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

Re: How do you use FlickType?

Jessica D
 

Hi,
FlickType is my new favorite way to type.
I find it easiest to use voiceover, and just type like I normally would, with both of my index fingers.

Thanks,
Jessica

On Apr 9, 2018 2:49 PM, Chuck Dean <cadean329@...> wrote:

How do you use FlickType?
Hello everyone,
After a few hours of playing with FlickType I have found the best way, for me, to use this keyboard is to hold it between my hands in landscape mode, with my index fingers over the top, and I type with my two thumbs.
This allows me to hold the iPhone securely and type quickly. I
The only problem I had was inserting a new line, because to flick down with two fingers I had to change my grip, and the new line button on the lower right was a little too awkward for my aging thumbs.
But I found that I can flick down with both thumbs to get the same results.
The more I use this app, the better it gets!


Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400



Re: How do you use FlickType?

Tangela Mahaffey <tangela.m.m@...>
 

Interesting! I’ve never done the thumb typing thing. I just hold it in portrate, with my thumbs mostly supporting the phone, or on a flat surface, and just type with my two index fingers.