On 9 Apr 2018, at 07:57, Chuck Dean <cadean329@gmail.com> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@gmail.com> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <walemly@gmail.com> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400

On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@gmail.com> cadean329@gmail.com> wrote:

Hi Alan,

I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.

This is where I went to find a sub groups:

<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages

Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:walemly@gmail.com> walemly@gmail.com> wrote:

Hi List,

Okay, I'm still scratching my head a bit. I posted the below message

as explained in order to test posting to the subgroups. I got back

three Delivery Status Notification Failure messages from the Mail

Delivery Subsystem for each message sent to alpha, beta, and hello

followed by @flicktype.groups.io. The failure message contained the following:

Message not delivered

Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io

because the remote server is misconfigured. See technical details

below for more information.

The response from the remote server was:

510 5.1.1 Your email address, <mailto:walemly@gmail.com> walemly@gmail.com, is not subscribed to

that group.

However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the

below message I believe to which I'm now replying. I'm confused because the To:

address in this message to which I replied is

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it

in directly. I don't believe I made a typo but anything is possible.

Hopefully, Kosta or Ashley or someone with more experience with

subgroups in Groups.io can chime in with some guidance.

Alan Lemly

-----Original Message-----

From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On

Behalf Of Alan Lemly

Sent: Sunday, April 08, 2018 9:12 PM

To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io

Cc: <mailto:flicktype@groups.io> flicktype@groups.io

Subject: [flicktype] Test message to Flicktype subgroups and former

group address

Hi List,

I'm still learning about subgroups on Groups.io but I'm testing

sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone

already in the main FlickType group was automatically added. I also

am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>

<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master

group but Kosta's message below seems to imply that general group

messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and

hello in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.

Alan Lemly

On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@gmail.com> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <walemly@gmail.com> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400

On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@gmail.com> cadean329@gmail.com> wrote:

Hi Alan,

I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.

This is where I went to find a sub groups:

<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages

Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:walemly@gmail.com> walemly@gmail.com> wrote:

Hi List,

Okay, I'm still scratching my head a bit. I posted the below message

as explained in order to test posting to the subgroups. I got back

three Delivery Status Notification Failure messages from the Mail

Delivery Subsystem for each message sent to alpha, beta, and hello

followed by @flicktype.groups.io. The failure message contained the following:

Message not delivered

Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io

because the remote server is misconfigured. See technical details

below for more information.

The response from the remote server was:

510 5.1.1 Your email address, <mailto:walemly@gmail.com> walemly@gmail.com, is not subscribed to

that group.

However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the

below message I believe to which I'm now replying. I'm confused because the To:

address in this message to which I replied is

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it

in directly. I don't believe I made a typo but anything is possible.

Hopefully, Kosta or Ashley or someone with more experience with

subgroups in Groups.io can chime in with some guidance.

Alan Lemly

-----Original Message-----

From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On

Behalf Of Alan Lemly

Sent: Sunday, April 08, 2018 9:12 PM

To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io

Cc: <mailto:flicktype@groups.io> flicktype@groups.io

Subject: [flicktype] Test message to Flicktype subgroups and former

group address

Hi List,

I'm still learning about subgroups on Groups.io but I'm testing

sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone

already in the main FlickType group was automatically added. I also

am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>

<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master

group but Kosta's message below seems to imply that general group

messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and

hello in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.

Alan Lemly

On 9 Apr 2018, at 05:29, Alan Lemly <walemly@gmail.com> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400

On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@gmail.com> cadean329@gmail.com> wrote:

Hi Alan,

I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.

This is where I went to find a sub groups:

<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages

Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:walemly@gmail.com> walemly@gmail.com> wrote:

Hi List,

Okay, I'm still scratching my head a bit. I posted the below message

as explained in order to test posting to the subgroups. I got back

three Delivery Status Notification Failure messages from the Mail

Delivery Subsystem for each message sent to alpha, beta, and hello

followed by @flicktype.groups.io. The failure message contained the following:

Message not delivered

Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io

because the remote server is misconfigured. See technical details

below for more information.

The response from the remote server was:

510 5.1.1 Your email address, <mailto:walemly@gmail.com> walemly@gmail.com, is not subscribed to

that group.

However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the

below message I believe to which I'm now replying. I'm confused because the To:

address in this message to which I replied is

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it

in directly. I don't believe I made a typo but anything is possible.

Hopefully, Kosta or Ashley or someone with more experience with

subgroups in Groups.io can chime in with some guidance.

Alan Lemly

-----Original Message-----

From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On

Behalf Of Alan Lemly

Sent: Sunday, April 08, 2018 9:12 PM

To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io

Cc: <mailto:flicktype@groups.io> flicktype@groups.io

Subject: [flicktype] Test message to Flicktype subgroups and former

group address

Hi List,

I'm still learning about subgroups on Groups.io but I'm testing

sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone

already in the main FlickType group was automatically added. I also

am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>

<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master

group but Kosta's message below seems to imply that general group

messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and

hello in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.

Alan Lemly

On Apr 8, 2018, at 2:35 AM, Shameless FanGirl <shamelessfangirl@gmail.com> wrote:

Count me in also, but if it’s a TestFlight install, use indigocellist@gmail.com <mailto:indigocellist@gmail.com>rather than this email address.

On Apr 7, 2018, at 11:16 PM, Maria and Joe Chapman <bubbygirl1972@gmail.com> wrote:

HI.

I would also like to be added to the alpha group.

thanks
Maria

On 8 Apr 2018, at 3:18 pm, Nozi <noziphokhanda@gmail.com> wrote:

Please add me to the Alpha group as well.

On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@gmail.com> cadean329@gmail.com> wrote:

Hi Alan,

I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.

This is where I went to find a sub groups:

<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages

Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:walemly@gmail.com> walemly@gmail.com> wrote:

Hi List,

Okay, I'm still scratching my head a bit. I posted the below message

as explained in order to test posting to the subgroups. I got back

three Delivery Status Notification Failure messages from the Mail

Delivery Subsystem for each message sent to alpha, beta, and hello

followed by @flicktype.groups.io. The failure message contained the following:

Message not delivered

Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io

because the remote server is misconfigured. See technical details

below for more information.

The response from the remote server was:

510 5.1.1 Your email address, <mailto:walemly@gmail.com> walemly@gmail.com, is not subscribed to

that group.

However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the

below message I believe to which I'm now replying. I'm confused because the To:

address in this message to which I replied is

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it

in directly. I don't believe I made a typo but anything is possible.

Hopefully, Kosta or Ashley or someone with more experience with

subgroups in Groups.io can chime in with some guidance.

Alan Lemly

-----Original Message-----

From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On

Behalf Of Alan Lemly

Sent: Sunday, April 08, 2018 9:12 PM

To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io

Cc: <mailto:flicktype@groups.io> flicktype@groups.io

Subject: [flicktype] Test message to Flicktype subgroups and former

group address

Hi List,

I'm still learning about subgroups on Groups.io but I'm testing

sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone

already in the main FlickType group was automatically added. I also

am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>

<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master

group but Kosta's message below seems to imply that general group

messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>

<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and

hello in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.

Alan Lemly

On Apr 8, 2018, at 7:49 PM, Chuck Dean <cadean329@gmail.com> wrote:

Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.

This is where I went to find a sub groups:
https://flicktype.groups.io/g/beta/messages

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:30 PM, Alan Lemly <walemly@gmail.com> wrote:

Hi List,



Okay, I'm still scratching my head a bit. I posted the below message as
explained in order to test posting to the subgroups. I got back three
Delivery Status Notification Failure messages from the Mail Delivery
Subsystem for each message sent to alpha, beta, and hello followed by
@flicktype.groups.io. The failure message contained the following:





Message not delivered


Your message couldn't be delivered to alpha@flicktype.groups.io because the
remote server is misconfigured. See technical details below for more
information.

The response from the remote server was:

510 5.1.1 Your email address, walemly@gmail.com, is not subscribed to that
group.



However, the cc: sent to flicktype@groups.io did come through as the below
message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is hello@flicktype.groups.io
which didn't seem to work when I typed it in directly. I don't believe I
made a typo but anything is possible.



Hopefully, Kosta or Ashley or someone with more experience with subgroups in
Groups.io can chime in with some guidance.



Alan Lemly





-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf
Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: hello@flicktype.groups.io
Cc: flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former group
address



Hi List,





I'm still learning about subgroups on Groups.io but I'm testing sending a
message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone already in
the main FlickType group was automatically added. I also am unclear why the
former <mailto:flicktype@groups.io> flicktype@groups.io address no longer
works since it was the master group but Kosta's message below seems to imply
that general group messages should go to <mailto:hello@flicktype.groups.io>
hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and hello
in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.





Alan Lemly

On Apr 8, 2018, at 7:30 PM, Alan Lemly <walemly@gmail.com> wrote:

Hi List,



Okay, I'm still scratching my head a bit. I posted the below message as
explained in order to test posting to the subgroups. I got back three
Delivery Status Notification Failure messages from the Mail Delivery
Subsystem for each message sent to alpha, beta, and hello followed by
@flicktype.groups.io. The failure message contained the following:





Message not delivered


Your message couldn't be delivered to alpha@flicktype.groups.io because the
remote server is misconfigured. See technical details below for more
information.

The response from the remote server was:

510 5.1.1 Your email address, walemly@gmail.com, is not subscribed to that
group.



However, the cc: sent to flicktype@groups.io did come through as the below
message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is hello@flicktype.groups.io
which didn't seem to work when I typed it in directly. I don't believe I
made a typo but anything is possible.



Hopefully, Kosta or Ashley or someone with more experience with subgroups in
Groups.io can chime in with some guidance.



Alan Lemly





-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf
Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: hello@flicktype.groups.io
Cc: flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former group
address



Hi List,





I'm still learning about subgroups on Groups.io but I'm testing sending a
message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone already in
the main FlickType group was automatically added. I also am unclear why the
former <mailto:flicktype@groups.io> flicktype@groups.io address no longer
works since it was the master group but Kosta's message below seems to imply
that general group messages should go to <mailto:hello@flicktype.groups.io>
hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and hello
in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.





Alan Lemly

On Apr 8, 2018, at 7:02 PM, Sy Hoekstra <sy.hoekstra@gmail.com> wrote:

I hadn't been planning on it because I thought I remembered seeing something
on Apple Vis about some new bug on 11.3 that sounded annoying, but I can't
find what that was now. So I will tonight.

-----Original Message-----
From: hello@flicktype.groups.io <hello@flicktype.groups.io> On Behalf Of
Jessica D
Sent: Sunday, April 8, 2018 9:21 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] BTW I am using an iPhone 8 running iOS 11.

Hi,
Do you plan to update to 11.3?


Thanks,
Jessica

On Apr 8, 2018, at 7:04 PM, Sy Hoekstra <sy.hoekstra@gmail.com> wrote:

No crashing for me. On an iPhone 7 running ios 11.2.6

On Apr 8, 2018, at 18:10, Chuck Dean <cadean329@gmail.com> wrote:

BTW I am using an iPhone 8 running iOS 11. 3 and FlickType is working

perfectly. I have had no crashes at all, knock on wood.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:04 PM, Sy Hoekstra <sy.hoekstra@gmail.com> wrote:

No crashing for me. On an iPhone 7 running ios 11.2.6

On Apr 8, 2018, at 18:10, Chuck Dean <cadean329@gmail.com> wrote:

BTW I am using an iPhone 8 running iOS 11. 3 and FlickType is working

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 6:20 PM, Jessica D <jldail13@gmail.com> wrote:

Hi,
Do you plan to update to 11.3?


Thanks,
Jessica

On Apr 8, 2018, at 7:04 PM, Sy Hoekstra <sy.hoekstra@gmail.com> wrote:

No crashing for me. On an iPhone 7 running ios 11.2.6

On Apr 8, 2018, at 18:10, Chuck Dean <cadean329@gmail.com> wrote:

BTW I am using an iPhone 8 running iOS 11. 3 and FlickType is working perfectly. I have had no crashes at all, knock on wood.


Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:04 PM, Sy Hoekstra <sy.hoekstra@gmail.com> wrote:

No crashing for me. On an iPhone 7 running ios 11.2.6

On Apr 8, 2018, at 18:10, Chuck Dean <cadean329@gmail.com> wrote:

BTW I am using an iPhone 8 running iOS 11. 3 and FlickType is working perfectly. I have had no crashes at all, knock on wood.


Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 18:10, Chuck Dean <cadean329@gmail.com> wrote:

BTW I am using an iPhone 8 running iOS 11. 3 and FlickType is working perfectly. I have had no crashes at all, knock on wood.


Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 5:56 PM, Chuck Dean <cadean329@gmail.com> wrote:

Hello everyone,
I may have the answer, and then again I may not. I went to the following link:

https://flicktype.groups.io/g/beta

There I could subscribe to the Beta group at Fliktype. There are three other members besides me.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 4:20 PM, Dave <dave.beckett.uk@gmail.com> wrote:

Hi Paula,

you're not on your own, i'm very confused too.

Dave.


-----Original Message----- From: Paula Page
Sent: Sunday, April 08, 2018 10:37 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Email Operations for Changing Groups.io List Settings

I am very confused. If I stay in this group, what messages will I get? Do I need to join a subgroup?

Paula

On 8 Apr 2018, at 21:30, FlickType <hello@flicktype.com> wrote:

Please note that we have now created the alpha@flicktype.groups.io and beta@flicktype.groups.io subgroups. This means that the general group had to change to a flicktype.groups.io type of address, and it is now hello@flicktype.groups.io. I am not sure if the above posted links by Alan will now work, but it's worth a try.

FYI the creation of the 2 subgroups was done for the following reason:

The number of beta testers has increased dramatically, and keeps increasing faster and faster, and with that the number of messages will soon be problematic for folks looking to find something specific as well as keep their inbox under control. The alpha group will take away some of that volume and will also ensure that the beta releases, even though less frequent, will be more polished and probably trigger fewer bug report messages. In a similar fashion, once FlickType hits the App Store later this month, many people will want to join the discussion but will not be interested in anything related to beta or alpha builds.

Hope this helps, and please let us know how we can further improve this, we are open to ideas.
- Kosta

On Apr 8, 2018, at 4:20 PM, Dave <dave.beckett.uk@gmail.com> wrote:

Hi Paula,

you're not on your own, i'm very confused too.

Dave.


-----Original Message----- From: Paula Page
Sent: Sunday, April 08, 2018 10:37 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Email Operations for Changing Groups.io List Settings

I am very confused. If I stay in this group, what messages will I get? Do I need to join a subgroup?

Paula

On 8 Apr 2018, at 21:30, FlickType <hello@flicktype.com> wrote:

Please note that we have now created the alpha@flicktype.groups.io and beta@flicktype.groups.io subgroups. This means that the general group had to change to a flicktype.groups.io type of address, and it is now hello@flicktype.groups.io. I am not sure if the above posted links by Alan will now work, but it's worth a try.

FYI the creation of the 2 subgroups was done for the following reason:

The number of beta testers has increased dramatically, and keeps increasing faster and faster, and with that the number of messages will soon be problematic for folks looking to find something specific as well as keep their inbox under control. The alpha group will take away some of that volume and will also ensure that the beta releases, even though less frequent, will be more polished and probably trigger fewer bug report messages. In a similar fashion, once FlickType hits the App Store later this month, many people will want to join the discussion but will not be interested in anything related to beta or alpha builds.

Hope this helps, and please let us know how we can further improve this, we are open to ideas.
- Kosta

On 8 Apr 2018, at 21:30, FlickType <hello@flicktype.com> wrote:

Please note that we have now created the alpha@flicktype.groups.io and beta@flicktype.groups.io subgroups. This means that the general group had to change to a flicktype.groups.io type of address, and it is now hello@flicktype.groups.io. I am not sure if the above posted links by Alan will now work, but it's worth a try.

FYI the creation of the 2 subgroups was done for the following reason:

The number of beta testers has increased dramatically, and keeps increasing faster and faster, and with that the number of messages will soon be problematic for folks looking to find something specific as well as keep their inbox under control. The alpha group will take away some of that volume and will also ensure that the beta releases, even though less frequent, will be more polished and probably trigger fewer bug report messages. In a similar fashion, once FlickType hits the App Store later this month, many people will want to join the discussion but will not be interested in anything related to beta or alpha builds.

Hope this helps, and please let us know how we can further improve this, we are open to ideas.
- Kosta