Date   
Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.

This is where I went to find a sub groups:
https://flicktype.groups.io/g/beta/messages

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:30 PM, Alan Lemly <@walemly> wrote:

Hi List,



Okay, I'm still scratching my head a bit. I posted the below message as
explained in order to test posting to the subgroups. I got back three
Delivery Status Notification Failure messages from the Mail Delivery
Subsystem for each message sent to alpha, beta, and hello followed by
@flicktype.groups.io. The failure message contained the following:





Message not delivered


Your message couldn't be delivered to alpha@flicktype.groups.io because the
remote server is misconfigured. See technical details below for more
information.

The response from the remote server was:

510 5.1.1 Your email address, @walemly, is not subscribed to that
group.



However, the cc: sent to flicktype@groups.io did come through as the below
message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is hello@flicktype.groups.io
which didn't seem to work when I typed it in directly. I don't believe I
made a typo but anything is possible.



Hopefully, Kosta or Ashley or someone with more experience with subgroups in
Groups.io can chime in with some guidance.



Alan Lemly





-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf
Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: hello@flicktype.groups.io
Cc: flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former group
address



Hi List,





I'm still learning about subgroups on Groups.io but I'm testing sending a
message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone already in
the main FlickType group was automatically added. I also am unclear why the
former <mailto:flicktype@groups.io> flicktype@groups.io address no longer
works since it was the master group but Kosta's message below seems to imply
that general group messages should go to <mailto:hello@flicktype.groups.io>
hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and hello
in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.





Alan Lemly









Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

Hello Alan,
When I send an email to the email address that begins with hello, it ends up coming back to hear.

When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.
I’m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 7:49 PM, Chuck Dean <cadean329@...> wrote:

Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.

This is where I went to find a sub groups:
https://flicktype.groups.io/g/beta/messages

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 7:30 PM, Alan Lemly <@walemly> wrote:

Hi List,



Okay, I'm still scratching my head a bit. I posted the below message as
explained in order to test posting to the subgroups. I got back three
Delivery Status Notification Failure messages from the Mail Delivery
Subsystem for each message sent to alpha, beta, and hello followed by
@flicktype.groups.io. The failure message contained the following:





Message not delivered


Your message couldn't be delivered to alpha@flicktype.groups.io because the
remote server is misconfigured. See technical details below for more
information.

The response from the remote server was:

510 5.1.1 Your email address, @walemly, is not subscribed to that
group.



However, the cc: sent to flicktype@groups.io did come through as the below
message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is hello@flicktype.groups.io
which didn't seem to work when I typed it in directly. I don't believe I
made a typo but anything is possible.



Hopefully, Kosta or Ashley or someone with more experience with subgroups in
Groups.io can chime in with some guidance.



Alan Lemly





-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf
Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: hello@flicktype.groups.io
Cc: flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former group
address



Hi List,





I'm still learning about subgroups on Groups.io but I'm testing sending a
message to the new alpha and beta subgroups Kosta wrote about earlier today.

I'm not sure if we have to join these subgroups or if everyone already in
the main FlickType group was automatically added. I also am unclear why the
former <mailto:flicktype@groups.io> flicktype@groups.io address no longer
works since it was the master group but Kosta's message below seems to imply
that general group messages should go to <mailto:hello@flicktype.groups.io>
hello@flicktype.groups.io which sounds like another subgroup.

This test message was sent to the three subgroups of alpha, beta, and hello
in the To: field and to the original main group of flicktype in the CC:

field in order to see what happens.





Alan Lemly









Re: Test message to Flicktype subgroups and former group address

 

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan

-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly

Re: Looking for alpha testers

Rocco Fiorentino
 

Yes, if email address matters, use rocco@... <mailto:rocco@...> for the alpha test flight info.

Thanks,

Rocco

On Apr 8, 2018, at 2:35 AM, Shameless FanGirl <shamelessfangirl@...> wrote:

Count me in also, but if it’s a TestFlight install, use indigocellist@... <mailto:indigocellist@...>rather than this email address.
On Apr 7, 2018, at 11:16 PM, Maria and Joe Chapman <bubbygirl1972@...> wrote:

HI.

I would also like to be added to the alpha group.

thanks
Maria

On 8 Apr 2018, at 3:18 pm, Nozi <noziphokhanda@...> wrote:

Please add me to the Alpha group as well.




Re: Test message to Flicktype subgroups and former group address

Paula Page
 

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly






Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly







Re: Test message to Flicktype subgroups and former group address

Paula Page
 

I'm assuming I'm a beta tester as I only joined yesterday!

Paula

On 9 Apr 2018, at 07:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly








Re: Test message to Flicktype subgroups and former group address

Harry Bell
 

I’m losing the plot here! What is an alpha tester? I’m testing the Flicktype beta which is early versions of Flicktype. The alpha versions are what?
Thanks
Harry

On 9 Apr 2018, at 08:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly








Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

As the Greek alphabet would suggest, alpha testers get software that is less refined and more buggy than what is released to us beta testers. Once software has gone through alpha testing, it is sent to the beta testers to iron out any bugs and to discover improvements that should be included in the software before it is released to the general public.

I hope this helps.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 9, 2018, at 12:04 AM, Harry Bell <ubupanoramix@...> wrote:

I’m losing the plot here! What is an alpha tester? I’m testing the Flicktype beta which is early versions of Flicktype. The alpha versions are what?
Thanks
Harry

On 9 Apr 2018, at 08:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly









Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

You are a beta tester because you joined as a beta tester. If you volunteered to be an alpha tester, then you will be an alpha tester. Someone who is an alpha test is going to have to have much more patience, and understand that the earliest versions of the software are going to be very buggy and very problematic. Therefore they are the ones that smooth out the rough edges, before the beta testers get it.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 9, 2018, at 12:01 AM, Paula Page <fairyhugs@...> wrote:

I'm assuming I'm a beta tester as I only joined yesterday!

Paula

On 9 Apr 2018, at 07:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly









Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.

-----Original Message-----
From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly






Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

Hi Paula,

you have to ask, to become a Alpha tester.

Dave.

-----Original Message-----
From: Paula Page
Sent: Monday, April 09, 2018 8:01 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I'm assuming I'm a beta tester as I only joined yesterday!

Paula

On 9 Apr 2018, at 07:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly








Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

Hi guys, if nothing else, it makes a great comedy sketch. lol.

I think i need Alpha testers for my head.

Dave.

-----Original Message-----
From: Harry Bell
Sent: Monday, April 09, 2018 8:04 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I’m losing the plot here! What is an alpha tester? I’m testing the Flicktype beta which is early versions of Flicktype. The alpha versions are what?
Thanks
Harry

On 9 Apr 2018, at 08:57, Chuck Dean <cadean329@...> wrote:

If you are an alpha tester you should join the alpha test group.
If you’re a beta tester you should join the beta test group.
But you should not join both groups.

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 8, 2018, at 11:33 PM, Paula Page <fairyhugs@...> wrote:

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly








Re: Test message to Flicktype subgroups and former group address

Chuck Dean
 

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400

On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly










Re: Test message to Flicktype subgroups and former group address

Paula Page
 

Ha ha, it was so simple, I missed that completely! :)

Paula

On 9 Apr 2018, at 09:12, Chuck Dean <cadean329@...> wrote:

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly











Re: Test message to Flicktype subgroups and former group address

Dave <dave.beckett.uk@...>
 

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message-----
From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly










Re: Test message to Flicktype subgroups and former group address

Daniel McGee
 

I thought this one that I'm on is the beta list. Where as the email address that starts with: hello was the address that Kosta & Ashley used for answering enquiries.

I'm feeling confused here as well. :(

On 9 Apr 2018, at 09:51, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly














Re: Test message to Flicktype subgroups and former group address

Paula Page
 

Its easy, I've worked it out now. This is the group for anything general, then you join either the alpha or beta group for anything more specific. :)
Paula

On 9 Apr 2018, at 09:51, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly














Re: Test message to Flicktype subgroups and former group address

MariaRosa Chapman
 

HI.

I requested to join the alpha team, but I haven’t seen a message to say whether or not I am on the alpha group.
please help?

thanks
Maria

On 9 Apr 2018, at 6:51 pm, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

I suggest you go to your phone, and put your finger on your FlickType icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I’m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages> https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to <mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly> @walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io> flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io <mailto:[mailto:hello@flicktype.groups.io]> [mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I also
am unclear why the former < <mailto:flicktype@groups.io> mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io> mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta, and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly














Re: Test message to Flicktype subgroups and former group address

 

Hi Folks,

I expect we're going to have to wait for the developers, Ashley or Kosta, to let us know how they want us to proceed with posting using the subgroups. I can offer my opinion on how I expect it will work but know that it is strictly speculation on my part.

The original flicktype group would have become the main or top group when the developers created the alpha and beta subgroups. I guess they renamed it as a subgroup called hello@flicktype.groups.io in order to have a separately named location for the main group postings formerly going to flicktype@groups.io. In fact, if you initiate a new post to the old flicktype@groups.io address, the message is posted as coming from hello@flicktype.groups.io without any special action on your part.

As the Alpha program becomes more active, I expect they will want messages regarding those releases to go to alpha@flicktype.groups.io. At some point, the FlickType app will officially drop and I imagine the Hello subgroup will be where messages related to it will be posted. Any dialog concerned with alpha or beta builds will probably go to those subgroups.

As I said initially, we'll have to wait for the developers to clarify this and as with any new venture, confusion should wane as the process evolves.

Happy FlickTyping.

Alan Lemly

-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io] On Behalf Of Maria and Joe Chapman
Sent: Monday, April 09, 2018 4:24 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and former group address

HI.

I requested to join the alpha team, but I haven t seen a message to say whether or not I am on the alpha group.
please help?

thanks
Maria

On 9 Apr 2018, at 6:51 pm, Dave <dave.beckett.uk@...> wrote:

i was told, that i am on the Alpha team.

the confusion, is with the 3 different mailing lists, as this one, use to be the beta list, and now i think it is the general list, but i am still trying to work it out, like many others.

-----Original Message----- From: Chuck Dean
Sent: Monday, April 09, 2018 9:12 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and
former group address

I suggest you go to your phone, and put your finger on your FlickType
icon. If it says Fliktype beta, then you are a beta tester

Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.

Our 1972 Honda 600 Coupe

Our 1961 Vespa 400


On Apr 9, 2018, at 1:02 AM, Dave <dave.beckett.uk@...> wrote:

i have just woke up, and i am still a lot confused.

what list am i posting to? hmmmm. lol.

Dave.


-----Original Message----- From: Paula Page
Sent: Monday, April 09, 2018 7:33 AM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and
former group address

But which subgroup are we supposed to be joining? And if everyone is joining both, what is the point of the subgroups? Just asking, because I m still a bit confused.

Paula

On 9 Apr 2018, at 05:29, Alan Lemly <@walemly> wrote:

Chuck,



Thanks for explaining this. Yes, you're right that those wanting to post to the FlickType alpha and beta subgroups must subscribe to them. You can do so by sending a blank email to:



Alpha subgroup: alpha+subscribe@flicktype.groups.io

Beta subgroup: beta+subscribe@flicktype.groups.io



The links following subgroup and colon above are live and should generate a new email in your email client when executed. Simply send that message and you'll receive a confirmation message which you must reply to in order to confirm your subscription to the subgroup.



I think messages posted to flicktype@groups.io will show as being sent to hello@flicktype.groups.io but I'm not positive of this. When I tried posting to hello@flicktype.groups.io, I thought I got an error message.



I'm sure Kosta or Ashley will chime in with some more direction on how they want the list to proceed with posting to the subgroups.



Alan



-----Original Message-----
From: hello@flicktype.groups.io [mailto:hello@flicktype.groups.io]
On Behalf Of Chuck Dean
Sent: Sunday, April 08, 2018 11:09 PM
To: hello@flicktype.groups.io
Subject: Re: [flicktype] Test message to Flicktype subgroups and
former group address



Hello Alan,

When I send an email to the email address that begins with hello, it ends up coming back to hear.



When I send an email to the email address that begins with beta, it goes to the beta sub group, and is sent back to my email address.

I m not sure what this proves, but I think everybody who wants to be on the new beta list will have to subscribe at the website.



Chuck (mobile)

Pleez x cuze enny tie ping or spelin air ores.



Our 1972 Honda 600 Coupe



Our 1961 Vespa 400





On Apr 8, 2018, at 7:49 PM, Chuck Dean < <mailto:cadean329@...> cadean329@...> wrote:
Hi Alan,
I tried to email you on the other post that you just left, and it said that it was an invalid address. So I am trying you on this post.
This is where I went to find a sub groups:
<https://flicktype.groups.io/g/beta/messages>
https://flicktype.groups.io/g/beta/messages
Chuck (mobile)
Pleez x cuze enny tie ping or spelin air ores.
Our 1972 Honda 600 Coupe
Our 1961 Vespa 400
On Apr 8, 2018, at 7:30 PM, Alan Lemly < <mailto:@walemly> @walemly> wrote:
Hi List,
Okay, I'm still scratching my head a bit. I posted the below
message
as explained in order to test posting to the subgroups. I got back
three Delivery Status Notification Failure messages from the Mail
Delivery Subsystem for each message sent to alpha, beta, and hello
followed by @flicktype.groups.io. The failure message contained the following:
Message not delivered
Your message couldn't be delivered to
<mailto:alpha@flicktype.groups.io> alpha@flicktype.groups.io
because the remote server is misconfigured. See technical details
below for more information.
The response from the remote server was:
510 5.1.1 Your email address, <mailto:@walemly>
@walemly, is not subscribed to
that group.
However, the cc: sent to <mailto:flicktype@groups.io>
flicktype@groups.io did come through as the
below message I believe to which I'm now replying. I'm confused because the To:
address in this message to which I replied is
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which
didn't seem to work when I typed it
in directly. I don't believe I made a typo but anything is possible.
Hopefully, Kosta or Ashley or someone with more experience with
subgroups in Groups.io can chime in with some guidance.
Alan Lemly
-----Original Message-----
From: <mailto:hello@flicktype.groups.io>
hello@flicktype.groups.io
<mailto:[mailto:hello@flicktype.groups.io]>
[mailto:hello@flicktype.groups.io] On
Behalf Of Alan Lemly
Sent: Sunday, April 08, 2018 9:12 PM
To: <mailto:hello@flicktype.groups.io> hello@flicktype.groups.io
Cc: <mailto:flicktype@groups.io> flicktype@groups.io
Subject: [flicktype] Test message to Flicktype subgroups and
former
group address
Hi List,
I'm still learning about subgroups on Groups.io but I'm testing
sending a message to the new alpha and beta subgroups Kosta wrote about earlier today.
I'm not sure if we have to join these subgroups or if everyone
already in the main FlickType group was automatically added. I
also
am unclear why the former < <mailto:flicktype@groups.io>
mailto:flicktype@groups.io>
<mailto:flicktype@groups.io> flicktype@groups.io address no longer
works since it was the master
group but Kosta's message below seems to imply that general group
messages should go to < <mailto:hello@flicktype.groups.io>
mailto:hello@flicktype.groups.io>
<mailto:hello@flicktype.groups.io> hello@flicktype.groups.io which sounds like another subgroup.
This test message was sent to the three subgroups of alpha, beta,
and
hello in the To: field and to the original main group of flicktype in the CC:
field in order to see what happens.
Alan Lemly