Date   
Text population question

Ed Worrell
 

Hello Kosta,

Awhile back you mentioned that someday you might have the FlickType keyboard populate the text field as text is being written. I believe you said that the draw back of this method is we would have to turn off all VoiceOver typing feedback. With the current state of the keyboard would this make the disappearing text issue, well... Disappear? I personally feel that the keyboard is just about close enough to fully independently used with out needing the iOS keyboard. For me the only real function missing is the ability to use the return key as a search key or junk fields in the nail application.

Just my thoughts. Again great job with the current releases.

Ed

Re: Build 73, text still vanishing.

Chuck Dean
 

Hi Kosta,
The last time the text vanished was about two hours ago from now.

I haven't noticed anything this time, but in the past I have noticed the screen flash.


Chuck

On May 28, 2018, at 3:17 PM, FlickType <@FlickType> wrote:

Thank you Chuck.

I wonder if the keyboard is crashing. Whenever the text vanishes, do you happen to hear anything like the keyboard dismissing and quickly reappearing? Or anything else unusual?

Also, do you happen to remember the approximate time of day when that happened? I might be able to correlate that with the crash reports, if I get any.

Thanks,
Kosta

On May 28, 2018, at 14:32, Chuck Dean <cadean329@...> wrote:


Hi Kosta,
I have had text vanish twice with this new build. Once with my notes app and once with the journal app.
It seems that it happens a few words after starting to type, so not a lot of text is lost.
I have not seen any text repeating in this build.


Chuck


Re: Build 73, text still vanishing.

 

Thank you Chuck.

I wonder if the keyboard is crashing. Whenever the text vanishes, do you happen to hear anything like the keyboard dismissing and quickly reappearing? Or anything else unusual?

Also, do you happen to remember the approximate time of day when that happened? I might be able to correlate that with the crash reports, if I get any.

Thanks,
Kosta

On May 28, 2018, at 14:32, Chuck Dean <cadean329@...> wrote:


Hi Kosta,
I have had text vanish twice with this new build. Once with my notes app and once with the journal app.
It seems that it happens a few words after starting to type, so not a lot of text is lost.
I have not seen any text repeating in this build.


Chuck

Build 73, text still vanishing.

Chuck Dean
 

Hi Kosta,
I have had text vanish twice with this new build. Once with my notes app and once with the journal app.
It seems that it happens a few words after starting to type, so not a lot of text is lost.
I have not seen any text repeating in this build.


Chuck

Re: Two issues while manually typing

 

Thank you for the feedback.

There are currently numerous spacing issues, most prominently when doing manual typing as well as when entering emoji. These will be addressed soon.

Same goes for getting the wrong character when you lift up your finger to manually type something.

Thank you for reporting, please keep it coming, smile!

Kosta

On May 28, 2018, at 12:00, David Nason <dnason@...> wrote:


Hey Salman,

I had reported the issue with the spaces being inserted into manually typed words, but I had not realized what was causing it. So thanks for that and hopefully Kosta can now fix it.

I also reported your second issue, which Kosta has acknowledged and says will be fixed in a future build.

Dave
On 28 May 2018, at 19:44, Salman Haider <salmanhaider.purdue@...> wrote:

Hi Kosta and Ashley and everyone else on the list,

Two issues that I would like to mention related to manual typing. I am
not sure if these have been discussed in any thread before, but I
haven't come across such a conversation if they have indeed been
brought up. I am going to detail them as best as I can:

1. During manual typing, there is an extra space inserted after the
last letter you type, if you make a mistake and swipe left to delete a
letter and then continue manually typing the rest of the word. Ok, I
know that sounds confusing, so here's an example. Lets say I am trying
to type the word"orange". I will start with the first letter o, then
type r, then I want to type a, but lets say I end up tapping s by
mistake. So I swipe left to delete the s, and then continue typing the
rest of the word. That is, ange.
Now, when I swipe right, I will hear Voiceover say, ange which gives
me the impression that the word was split up at the point I swiped
left to make a correction. This is confirmed when on checking the
text, it shows that the "or" and the "ange" have been seperated with a
space between them.

2. I also notice often while manually typing that the incorrect letter
gets typed when lifting the finger. Meaning, if I'm typing a word,
many times when I lift my finger to type a letter, a double keyboard
click sound is heard and the letter next to the letter I was
attempting to type gets entered instead. Which is why I find myself
swiping left to make corrections very regularly. But doing so causes
the problem I mentioned in number one. So more often than not I pretty
much have to delete the partial word and start typing it from scratch.

Thanks,

Salman



Re: Build 72

 

Whenever you go back to edit existing text, FlickType doesn’t know the entire text because iOS only supplies us with about a sentence or so from where the cursor happens to be. So if you go back to the iOS keyboard and then switch back to FlickType, you will likely only have one or two sentences available to edit and read back, even though the entire text should be in the text field. This may also happen if you remain on FlickType but switch apps.

Hope that makes sense.

Kosta

On May 28, 2018, at 11:34, Benny Barber <rebelben@...> wrote:


Yeah, that is what must be happening to me. Thanks.

Benny

On May 28, 2018, at 1:26 PM, Chuck Dean <cadean329@...> wrote:


Hi Benny,
I notice if I am typing, and leave the keyboard for a while, then continue typing, the three finger hold will only read from the point I started typing again.


Chuck

On May 28, 2018, at 10:30 AM, Benny Barber <rebelben@...> wrote:


Also in regards to the 3 finger tap and hold read back, the entire text is not read back sometimes. Thanks.

Benny

On May 28, 2018, at 11:54 AM, Chanelle Allen <chanellem.allen@...> wrote:

Hello,
I don't want a physical spacebar either. I like the idea of adding it to the punctuation selection options though. I have also noticed the bug where deleting a character entered manually with FlickType results in incorrect read back. The character that was corrected and the rest of the word are read but not the whole word.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of David Nason
Sent: Monday, May 28, 2018 11:39
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.



























Re: "FlickType Keyboard 1.1 (73)" for iOS is now available to test

Chanelle Allen
 

Hello,
I have also found that a space gets inserted after I delete a manually typed character and then finish typing the word. When doing a two finger flick to read over the word, the extra space is not announced. With the Last two FlickType builds, moving by character in manually typed words is possible. Upon switching keyboards and reading over the text I wrote, I am able to find the spaces separating parts of words. Typing things over again is sometimes time-consuming. Hopefully, this issue will be addressed soon.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of Salman Haider
Sent: Monday, May 28, 2018 13:51
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] "FlickType Keyboard 1.1 (73)" for iOS is now available to test

I just send an email to the group about this and mentioned it as one of the bugs I encountered. What I would add here is, not only is the Voiceover read back incorrect, but a space also gets inserted incorrectly at the point that that correction was made. So the word ends up getting split up.

Salman

On 5/28/18, Benny Barber <rebelben@...> wrote:



Begin forwarded message:

From: Benny Barber <rebelben@...>
Date: May 28, 2018 at 10:21:10 AM CDT
To: beta@...
Subject: Re: "FlickType Keyboard 1.1 (73)" for iOS is now available
to test

Kosta, if you type a word in touch typing mode, delete a letter that
you incorrectly entered, then flick right, the read back of the word
is not correct. The read back is from the corrected letter and does
not include the letters prior to the corrected letter. Thanks.

Benny

On May 27, 2018, at 10:36 PM, TestFlight <no_reply@...>
wrote:







FlickType Keyboard 1.1 (73) for iOS is ready to test

What To Test:

This release is solely focused on attempting to resolve text loss
and text duplication issues. If you ever lose any of your text for
whatever reason, please let us know, as well as if you ever get one
or more of your sentences to appear duplicated in the text field.
Please test as much as possible. If those issues are resolved,
there's a good chance we can then make the return key trigger the
appropriate action in some fields like search fields.

Thank you for testing,
Kosta & Ashley

To test this app, open TestFlight on your iOS device using iOS 9.3
or later and install the update.

In order to use FlickType Keyboard, you agree that crash data as
well as statistics about how you use FlickType Keyboard will be
provided to Kpaw, LLC and linked to your email address. Kpaw, LLC
may contact you regarding this information. You should review the
Terms and Conditions of the TestFlight program, as well as the
terms, policies, and practices of Kpaw, LLC. Beta apps may crash or result in data loss.



TestFlight is a service provided by Apple.
Terms of Service | Privacy Policy | Unsubscribe Copyright © 2018
Apple Inc. One Apple Park Way Cupertino, CA 95014, United States.

--
Muhammad Salman Haider
(765) 586-6840

Re: Two issues while manually typing

David Nason
 

Hey Salman,

I had reported the issue with the spaces being inserted into manually typed words, but I had not realized what was causing it. So thanks for that and hopefully Kosta can now fix it.

I also reported your second issue, which Kosta has acknowledged and says will be fixed in a future build.

Dave

On 28 May 2018, at 19:44, Salman Haider <salmanhaider.purdue@...> wrote:

Hi Kosta and Ashley and everyone else on the list,

Two issues that I would like to mention related to manual typing. I am
not sure if these have been discussed in any thread before, but I
haven't come across such a conversation if they have indeed been
brought up. I am going to detail them as best as I can:

1. During manual typing, there is an extra space inserted after the
last letter you type, if you make a mistake and swipe left to delete a
letter and then continue manually typing the rest of the word. Ok, I
know that sounds confusing, so here's an example. Lets say I am trying
to type the word"orange". I will start with the first letter o, then
type r, then I want to type a, but lets say I end up tapping s by
mistake. So I swipe left to delete the s, and then continue typing the
rest of the word. That is, ange.
Now, when I swipe right, I will hear Voiceover say, ange which gives
me the impression that the word was split up at the point I swiped
left to make a correction. This is confirmed when on checking the
text, it shows that the "or" and the "ange" have been seperated with a
space between them.

2. I also notice often while manually typing that the incorrect letter
gets typed when lifting the finger. Meaning, if I'm typing a word,
many times when I lift my finger to type a letter, a double keyboard
click sound is heard and the letter next to the letter I was
attempting to type gets entered instead. Which is why I find myself
swiping left to make corrections very regularly. But doing so causes
the problem I mentioned in number one. So more often than not I pretty
much have to delete the partial word and start typing it from scratch.

Thanks,

Salman


Re: "FlickType Keyboard 1.1 (73)" for iOS is now available to test

Paul Sutton
 

Yes, that happens to me also

On 28 May 2018, at 19:50, Salman Haider <salmanhaider.purdue@...> wrote:

I just send an email to the group about this and mentioned it as one
of the bugs I encountered. What I would add here is, not only is the
Voiceover read back incorrect, but a space also gets inserted
incorrectly at the point that that correction was made. So the word
ends up getting split up.

Salman

On 5/28/18, Benny Barber <rebelben@...> wrote:



Begin forwarded message:

From: Benny Barber <rebelben@...>
Date: May 28, 2018 at 10:21:10 AM CDT
To: beta@...
Subject: Re: "FlickType Keyboard 1.1 (73)" for iOS is now available to
test

Kosta, if you type a word in touch typing mode, delete a letter that you
incorrectly entered, then flick right, the read back of the word is not
correct. The read back is from the corrected letter and does not include
the letters prior to the corrected letter. Thanks.

Benny

On May 27, 2018, at 10:36 PM, TestFlight <no_reply@...>
wrote:







FlickType Keyboard 1.1 (73) for iOS is ready to test

What To Test:

This release is solely focused on attempting to resolve text loss and
text duplication issues. If you ever lose any of your text for whatever
reason, please let us know, as well as if you ever get one or more of
your sentences to appear duplicated in the text field. Please test as
much as possible. If those issues are resolved, there's a good chance we
can then make the return key trigger the appropriate action in some
fields like search fields.

Thank you for testing,
Kosta & Ashley

To test this app, open TestFlight on your iOS device using iOS 9.3 or
later and install the update.

In order to use FlickType Keyboard, you agree that crash data as well as
statistics about how you use FlickType Keyboard will be provided to Kpaw,
LLC and linked to your email address. Kpaw, LLC may contact you regarding
this information. You should review the Terms and Conditions of the
TestFlight program, as well as the terms, policies, and practices of
Kpaw, LLC. Beta apps may crash or result in data loss.



TestFlight is a service provided by Apple.
Terms of Service | Privacy Policy | Unsubscribe
Copyright © 2018 Apple Inc. One Apple Park Way
Cupertino, CA 95014, United States.

--
Muhammad Salman Haider
(765) 586-6840


Re: "FlickType Keyboard 1.1 (73)" for iOS is now available to test

Salman Haider
 

I just send an email to the group about this and mentioned it as one
of the bugs I encountered. What I would add here is, not only is the
Voiceover read back incorrect, but a space also gets inserted
incorrectly at the point that that correction was made. So the word
ends up getting split up.

Salman

On 5/28/18, Benny Barber <rebelben@...> wrote:



Begin forwarded message:

From: Benny Barber <rebelben@...>
Date: May 28, 2018 at 10:21:10 AM CDT
To: beta@...
Subject: Re: "FlickType Keyboard 1.1 (73)" for iOS is now available to
test

Kosta, if you type a word in touch typing mode, delete a letter that you
incorrectly entered, then flick right, the read back of the word is not
correct. The read back is from the corrected letter and does not include
the letters prior to the corrected letter. Thanks.

Benny

On May 27, 2018, at 10:36 PM, TestFlight <no_reply@...>
wrote:







FlickType Keyboard 1.1 (73) for iOS is ready to test

What To Test:

This release is solely focused on attempting to resolve text loss and
text duplication issues. If you ever lose any of your text for whatever
reason, please let us know, as well as if you ever get one or more of
your sentences to appear duplicated in the text field. Please test as
much as possible. If those issues are resolved, there's a good chance we
can then make the return key trigger the appropriate action in some
fields like search fields.

Thank you for testing,
Kosta & Ashley

To test this app, open TestFlight on your iOS device using iOS 9.3 or
later and install the update.

In order to use FlickType Keyboard, you agree that crash data as well as
statistics about how you use FlickType Keyboard will be provided to Kpaw,
LLC and linked to your email address. Kpaw, LLC may contact you regarding
this information. You should review the Terms and Conditions of the
TestFlight program, as well as the terms, policies, and practices of
Kpaw, LLC. Beta apps may crash or result in data loss.



TestFlight is a service provided by Apple.
Terms of Service | Privacy Policy | Unsubscribe
Copyright © 2018 Apple Inc. One Apple Park Way
Cupertino, CA 95014, United States.
--
Muhammad Salman Haider
(765) 586-6840

Two issues while manually typing

Salman Haider
 

Hi Kosta and Ashley and everyone else on the list,

Two issues that I would like to mention related to manual typing. I am
not sure if these have been discussed in any thread before, but I
haven't come across such a conversation if they have indeed been
brought up. I am going to detail them as best as I can:

1. During manual typing, there is an extra space inserted after the
last letter you type, if you make a mistake and swipe left to delete a
letter and then continue manually typing the rest of the word. Ok, I
know that sounds confusing, so here's an example. Lets say I am trying
to type the word"orange". I will start with the first letter o, then
type r, then I want to type a, but lets say I end up tapping s by
mistake. So I swipe left to delete the s, and then continue typing the
rest of the word. That is, ange.
Now, when I swipe right, I will hear Voiceover say, ange which gives
me the impression that the word was split up at the point I swiped
left to make a correction. This is confirmed when on checking the
text, it shows that the "or" and the "ange" have been seperated with a
space between them.

2. I also notice often while manually typing that the incorrect letter
gets typed when lifting the finger. Meaning, if I'm typing a word,
many times when I lift my finger to type a letter, a double keyboard
click sound is heard and the letter next to the letter I was
attempting to type gets entered instead. Which is why I find myself
swiping left to make corrections very regularly. But doing so causes
the problem I mentioned in number one. So more often than not I pretty
much have to delete the partial word and start typing it from scratch.

Thanks,

Salman

Re: Build 72

Benny Barber
 

Yeah, that is what must be happening to me. Thanks.

Benny

On May 28, 2018, at 1:26 PM, Chuck Dean <cadean329@...> wrote:


Hi Benny,
I notice if I am typing, and leave the keyboard for a while, then continue typing, the three finger hold will only read from the point I started typing again.


Chuck

On May 28, 2018, at 10:30 AM, Benny Barber <rebelben@...> wrote:


Also in regards to the 3 finger tap and hold read back, the entire text is not read back sometimes. Thanks.

Benny

On May 28, 2018, at 11:54 AM, Chanelle Allen <chanellem.allen@...> wrote:

Hello,
I don't want a physical spacebar either. I like the idea of adding it to the punctuation selection options though. I have also noticed the bug where deleting a character entered manually with FlickType results in incorrect read back. The character that was corrected and the rest of the word are read but not the whole word.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of David Nason
Sent: Monday, May 28, 2018 11:39
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.

























Re: Build 72

Chanelle Allen
 

I think that you need to hold three fingers down until all of the text is read. I haven't tried it in a while, so maybe keeping three fingers on the phone throughout read back still doesn't read everything.
Hope this helps.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of Benny Barber
Sent: Monday, May 28, 2018 12:31
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72


Also in regards to the 3 finger tap and hold read back, the entire text is not read back sometimes. Thanks.

Benny

On May 28, 2018, at 11:54 AM, Chanelle Allen <chanellem.allen@...> wrote:

Hello,
I don't want a physical spacebar either. I like the idea of adding it to the punctuation selection options though. I have also noticed the bug where deleting a character entered manually with FlickType results in incorrect read back. The character that was corrected and the rest of the word are read but not the whole word.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On
Behalf Of David Nason
Sent: Monday, May 28, 2018 11:39
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.






















Re: Build 72

David Nason
 

Yep, same here.

Dave

On 28 May 2018, at 19:26, Chuck Dean <cadean329@...> wrote:


Hi Benny,
I notice if I am typing, and leave the keyboard for a while, then continue typing, the three finger hold will only read from the point I started typing again.


Chuck

On May 28, 2018, at 10:30 AM, Benny Barber <rebelben@...> wrote:


Also in regards to the 3 finger tap and hold read back, the entire text is not read back sometimes. Thanks.

Benny

On May 28, 2018, at 11:54 AM, Chanelle Allen <chanellem.allen@...> wrote:

Hello,
I don't want a physical spacebar either. I like the idea of adding it to the punctuation selection options though. I have also noticed the bug where deleting a character entered manually with FlickType results in incorrect read back. The character that was corrected and the rest of the word are read but not the whole word.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of David Nason
Sent: Monday, May 28, 2018 11:39
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.

























Re: Build 72

Chuck Dean
 

Hi Benny,
I notice if I am typing, and leave the keyboard for a while, then continue typing, the three finger hold will only read from the point I started typing again.


Chuck

On May 28, 2018, at 10:30 AM, Benny Barber <rebelben@...> wrote:


Also in regards to the 3 finger tap and hold read back, the entire text is not read back sometimes. Thanks.

Benny

On May 28, 2018, at 11:54 AM, Chanelle Allen <chanellem.allen@...> wrote:

Hello,
I don't want a physical spacebar either. I like the idea of adding it to the punctuation selection options though. I have also noticed the bug where deleting a character entered manually with FlickType results in incorrect read back. The character that was corrected and the rest of the word are read but not the whole word.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of David Nason
Sent: Monday, May 28, 2018 11:39
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.
























Re: Build 72

Benny Barber
 

Also in regards to the 3 finger tap and hold read back, the entire text is not read back sometimes. Thanks.

Benny

On May 28, 2018, at 11:54 AM, Chanelle Allen <chanellem.allen@...> wrote:

Hello,
I don't want a physical spacebar either. I like the idea of adding it to the punctuation selection options though. I have also noticed the bug where deleting a character entered manually with FlickType results in incorrect read back. The character that was corrected and the rest of the word are read but not the whole word.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of David Nason
Sent: Monday, May 28, 2018 11:39
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.






















Re: Build 72

Chanelle Allen
 

Hello,
I don't want a physical spacebar either. I like the idea of adding it to the punctuation selection options though. I have also noticed the bug where deleting a character entered manually with FlickType results in incorrect read back. The character that was corrected and the rest of the word are read but not the whole word.
Chanelle

-----Original Message-----
From: alpha@flicktype.groups.io [mailto:alpha@flicktype.groups.io] On Behalf Of David Nason
Sent: Monday, May 28, 2018 11:39
To: alpha@flicktype.groups.io
Subject: Re: [FlickType-alpha] Build 72

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.

















Re: Build 72

Chuck Dean
 

I think the space should be manually inserted, too. Many times I don't want a space between my Emojis. Like this,
😊😄😃☺️😀😎



I like the idea of having a space included in the punctuation and emoji list.
Good thinking.🤔

Chuck

On May 28, 2018, at 9:38 AM, David Nason <dnason@...> wrote:

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave
On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.


















Re: Build 72

David Nason
 

Good point. I would generally want a space between the last word and the emoji.
However, if typing multiple emoji, I would not necessarily want a space between each of them. So perhaps the manual space option is better than the automatic one. I do not want a space bar though.

Dave

On 28 May 2018, at 17:17, Benny Barber <rebelben@...> wrote:

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.

















Re: Build 72

Benny Barber
 

True

On May 28, 2018, at 11:12 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

The other option is to have the keyboard place a space before the emoji.

This might be much simpler for the end user.

Ed
On May 28, 2018, at 10:09 AM, Benny Barber <rebelben@...> wrote:

Since we don't have a space bar, maybe Kosta could put a space option on the list of punctuation, where the emojis are at the top of the list. The space could be below punctuation options. Thanks.

Benny

On May 28, 2018, at 10:52 AM, Paul Sutton <sutty_p@...> wrote:


Hi Ed,
Benny is correct, you are unable to insert a space between the last word that you wrote and an emoji.
Regards, Paul.
On 28 May 2018, at 16:45, Ed Worrell <ed.worrell@...> wrote:


Hey Benny,

The secret to entering an emoji is to flick right to space, then a second space for punctuation. Instead it of flicking down to change the punctuation, you will now flick up and there will be about 5 or 6 emoji characters.

I hope this helps,

Ed
On May 28, 2018, at 9:38 AM, Benny Barber <rebelben@...> wrote:

Ed,

When typing in FlickType mode, I was trying to space after a word and then enter an emoji, but I could not figure out a way to put a space between the last word and the emoji🤔. See the example that I just typed. Thanks.

Benny

On May 28, 2018, at 10:08 AM, Ed Worrell <ed.worrell@...> wrote:

Hey Benny,

A flick right enters a space after a word is typed. In manual entry mode you cab enter as many spaces as you would like, but again I think this is only after typing a word as well. I thought there was mention of the spacebar in manual typing mode, but I can't seem to get that to show up. Maybe it has been removed to unify the gestures accross input modes.

Ed
On May 28, 2018, at 8:57 AM, Benny Barber <rebelben@...> wrote:


Actually I don't want a new line, but just a space. Thanks.

Benny

On May 28, 2018, at 9:50 AM, Ed Worrell <ed.worrell@...> wrote:

Hey,

Yes there is. The enter or return key at the bottom right corner of the keyboard will insert a new line.

I hope this helps.

Ed
On May 28, 2018, at 4:58 AM, Benny Barber <rebelben@...> wrote:


Is there a way to enter a manual space in the custom keyboard? Thanks.

On May 27, 2018, at 1:51 AM, FlickType <@FlickType> wrote:

- Added a "Next Keyboard" button for those having trouble with the flick up & hold gesture. If you don't need the button, you can disable it from the main app settings.
- Also added a setting for a "Dismiss" button similar to the above, but this one is off by default since most people didn't seem to have trouble with the flick down & hold gesture. If you do have trouble performing that gesture, you can enable this button from the settings.
- The shift state now resets after entering a single character, so it behaves more like a shift key rather than a caps lock.
- The shift state now affects words that were not manually typed, meaning that if you switch to uppercase in the middle of a sentence and type a word like "banana", it will be capitalized.
- Words will be capitalized after a new line.
- On devices that support 3D Touch, pressing down harder while exploring the keyboard will toggle the secondary layout, meaning the state of shift if you are in letters, or switch between numbers and symbols if you are in either numbers or symbols.